Fire Inspection FAQs

The applicable volume of the North Carolina State Fire Prevention Code and Chapter 16 of the Wake Forest Code of Ordinances.

The least complicated way to answer this question is to identify which buildings (occupancies) that the NC Fire Prevention Code does not apply to:

  • One and two family dwellings

  • Farm buildings

The State of North Carolina (G.S. 106A-411) requires cities and towns to conduct these inspections. “to preserve and protect public health and safety."

A Town of Wake Forest Fire Inspector. These inspectors have extensive training and experience in fire prevention, code enforcement, and apply first-hand knowledge to eliminate certain hazards that can endanger lives and property.

Effective 7/1/11, the square footage fee schedule for periodic fire inspections was dissolved.

The fire inspector retains the ability to assess non-compliance fees (fines) as needed.

Standard fines are $50 per violation item. Imminent life safety fines are $250 per violation item.

Our fire inspectors will make reasonable efforts to coordinate appointments to accommodate your business needs.

Please be aware that our fire inspections staff operate Monday-Friday, 8 a.m.-5 p.m. 

Here is a list of our most commonly identified fire code violations to assist you:

Combustible items in mechanical rooms and exit path ways.

Fire extinguishers need service or extinguishers are obstructed

Electric control panels blocked

Exit and emergency lighting doesn’t function when tested

Extension cord misuse(daisy chains, ran over or through walls)

Storage too close to the ceiling

Missing electric covers

Address numbers on buildings not posted or visible

Commercial kitchen hood systems need service

Fire Alarm system needs service

Fire Sprinkler system needs service

Fire doors propped open

 

Our re-inspection process allows approximately 30 days to correct most violations listed on your notice.

If there are any items remaining on the notice that will not be corrected before the re-inspection date, contact the fire inspector to discuss the situation.

If you are making reasonable efforts to comply with the code requirements listed we will provide the opportunity to reschedule the re-inspection (within reason).

The fire inspection is based on the use of the building/occupancy so the fire inspector will issue the violation notice on that basis.

A lease agreement will typically identify for which items you and the building owner are responsible.

You’ll need to review this issue with the building owner.

Be aware that uncorrected fire code violation items create unsafe conditions for anyone who may come into your place of business, even you.

Initially, our fire inspector will try to work with you through the corrections process so punitive measures will not be necessary.

Failure to comply with this process can result in fines, and possible criminal charges.